Department of Mechanical Engineering

Mechanical Engineering: M E

Lower-Division Courses

M E 302. Introduction to Engineering Design and Graphics.

Introduction to mechanical engineering education and practice through lectures and laboratory experiences. Graphics and modeling fundamentals for engineering design: freehand sketching, computer modeling of solid geometry, and generation of engineering drawings. Introduction to reverse engineering, computer-aided design, rapid prototyping, and manufacturing. Application of the design process and problem solving through individual and team projects. Two lecture hours and four laboratory hours a week for one semester. Only one of the following may be counted: Mechanical Engineering 302, 210, 210H. Prerequisite: Credit or registration for Mathematics 408C or 408K.

M E 103. Studies in Engineering Design Graphics.

Computer laboratory work in engineering design graphics for students with transfer credit for Mechanical Engineering 210 who need additional work. Three computer laboratory hours a week for one semester. May not be counted by students with credit for Mechanical Engineering 302, 210, or 210H. Prerequisite: Consent of the undergraduate adviser.

M E 205. Introduction to Computers and Programming.

Introduction to computer hardware and software systems; programming using a high-level language; mathematical software programming; and introduction to machine language. Includes significant hands-on programming opportunities. One lecture hour and three laboratory hours a week for one semester. May not be taken concurrently with Mechanical Engineering 302. Prerequisite: Credit or registration for Mathematics 408C or 408K.

M E 210. Engineering Design Graphics.

Graphics and modeling fundamentals for engineering design: freehand sketching, computer modeling of solid geometry, and generation of engineering drawings. Introduction to reverse engineering, computer-aided design, rapid prototyping, and manufacturing. Application of the design process to problem solving. Individual and team design projects. Two lecture hours and three laboratory hours a week for one semester. Only one of the following may be counted: Mechanical Engineering 302, 210, 210H. May not be counted toward the Bachelor of Science in Mechanical Engineering degree. Prerequisite: Credit or registration for Mathematics 408C or 408K.

M E 210H. Engineering Design Graphics: Honors.

Graphics and modeling fundamentals for engineering design: freehand sketching, computer modeling of solid geometry, and generation of engineering drawings. Introduction to reverse engineering, computer-aided design, rapid prototyping, and manufacturing. Application of the design process to problem solving. Individual and team design projects. One lecture hour and four laboratory hours a week for one semester. Only one of the following may be counted: Mechanical Engineering 302, 210, 210H. May not be counted toward the Bachelor of Science in Mechanical Engineering degree. Prerequisite: Credit or registration for Mathematics 408C or 408K, and admission to an engineering honors program.

M E 310T. Applied Thermodynamics.

First and second laws of thermodynamics; thermodynamics processes, cycles, and heat transfer. Three lecture hours a week for one semester. Mechanical Engineering 320 and 310T may not both be counted. May not be counted toward the Bachelor of Science in Mechanical Engineering degree. Prerequisite: Chemistry 301, Mathematics 408D, and Physics 303K.

M E 311. Materials Engineering.

An exploration of fundamental aspects of the structure, properties, and behavior of engineering materials. Three lecture hours a week for one semester. Prerequisite: The following courses with a grade of at least C- in each: Chemistry 301, Mechanical Engineering 302, Physics 303K, 103M; and credit or registration for Mechanical Engineering 111L, Physics 303L, and 103N.

M E 111L. Materials Engineering Laboratory.

Hands-on experiments in materials science and engineering topics and microstructure-property relationships discussed in Mechanical Engineering 311. One lecture hour and three laboratory hours a week for one semester. Prerequisite: Mechanical Engineering 302 with a grade of at least C-, and credit or registration for Mechanical Engineering 311.

M E 314D. Dynamics.

Analysis of motions, forces, momenta, and energies in mechanical systems. Three lecture hours and one discussion hour a week for one semester. Mechanical Engineering 324 and 314D may not both be counted. Prerequisite: Engineering Mechanics 306 and Mathematics 408D with a grade of at least C- in each, and credit or registration for Mechanical Engineering 318M.

M E 316T. Thermodynamics.

Properties, heat and work, first and second laws, thermodynamic processes, introduction to ideal power cycles. Three lecture hours a week for one semester, with additional hours to be arranged. Only one of the following may be counted: Mechanical Engineering 326, 326H, 316T. Prerequisite: Chemistry 301, Mathematics 408D, and Physics 303K with a grade of at least C- in each.

M E 218. Engineering Computational Methods.

Applied numerical analysis, programming of computational algorithms using mathematical software, and applications of computational methods to the solution of mechanical engineering problems. One and one-half lecture hours and one and one-half laboratory hours a week for one semester. Prerequisite: Mathematics 427J or 427K and Mechanical Engineering 205 with a grade of at least C- in each.

M E 318M. Programming and Engineering Computational Methods.

An investigation of applied numerical analysis, programming of computational algorithms using mathematical software, and applications of computational methods to the solution of mechanical engineering problems. Two lecture hours and one and one-half laboratory hours a week for one semester. Prerequisite: Mathematics 427J or 427K with a grade of at least C-.

M E 119S, 219S, 319S, 419S, 519S, 619S, 719S, 819S, 919S. Topics in Mechanical Engineering.

Used to record credit the student earns while enrolled at another institution in a program administered by the University's Study Abroad Office. Credit is recorded as assigned by the study abroad adviser in the Department of Mechanical Engineering. University credit is awarded for work in an exchange program; it may be counted as coursework taken in residence. Transfer credit is awarded for work in an affiliated studies program. May be repeated for credit when the topics vary.

Upper-Division Courses

M E 320. Applied Thermodynamics.

First and second laws of thermodynamics; thermodynamic processes, cycles, and heat transfer. Three lecture hours a week for one semester. Mechanical Engineering 320 and 310T may not both be counted. May not be counted toward the Bachelor of Science in Mechanical Engineering degree. Prerequisite: Chemistry 301, Mathematics 408D, and Physics 303K.

M E 324. Dynamics.

Analysis of motions, forces, momenta, and energies in mechanical systems. Three lecture hours and one discussion hour a week for one semester. Mechanical Engineering 314D and 324 may not both be counted. Prerequisite: Engineering Mechanics 306 and Mathematics 408D with a grade of at least C- in each; and credit or registration for Mechanical Engineering 318M.

M E 325L. Cooperative Engineering.

This course covers the work period of mechanical engineering students in the Cooperative Engineering Program. Forty laboratory hours a week for three semesters. Only one of the following may be counted: Mechanical Engineering 325L, 362K, 371K, 177K, 277K, 377K. The student must complete Mechanical Engineering 325LX, 325LY, and 325LZ before a grade and degree credit are awarded. May be repeated for credit. Prerequisite: For 325LX, application to become a member of the Cooperative Engineering Program, approval of the dean, and appointment for a full-time cooperative work tour; for 325LY, Mechanical Engineering 325LX and appointment for a full-time cooperative work tour; for 325LZ, Mechanical Engineering 325LY and appointment for a full-time cooperative work tour.

M E 225M. Cooperative Engineering.

This course covers the work period of mechanical engineering students in the Cooperative Engineering Program. Forty laboratory hours a week for two semesters. The student must complete Mechanical Engineering 225MA and 225MB before a grade and degree credit are awarded. Prerequisite: For 225MA, application to become a member of the Cooperative Engineering Program, approval of the dean, and appointment for a full-time cooperative work tour; for 225MB, Mechanical Engineering 225MA and appointment for a full-time cooperative work tour.

M E 125N. Cooperative Engineering.

This course covers the work period of mechanical engineering students in the Cooperative Engineering Program. Forty laboratory hours a week for one semester. May be repeated for credit. Prerequisite: Mechanical Engineering 325LZ or 225MB, application to become a member of the Cooperative Engineering Program, approval of the dean, and appointment for a full-time cooperative work tour.

M E 326. Thermodynamics.

Properties, heat and work, first and second laws, thermodynamic processes, introduction to ideal power cycles. Three lecture hours a week for one semester. For some sections, two discussion hours a week are also required. Only one of the following may be counted: Mechanical Engineering 326, 326H, 316T. Prerequisite: Chemistry 301, Mathematics 408D, and Physics 303K with a grade of at least C- in each.

M E 326H. Thermodynamics: Honors.

Properties, heat and work, first and second laws, thermodynamic processes, introduction to ideal power cycles. Three lecture hours a week for one semester. For some sections, two discussion hours a week are also required. Only one of the following may be counted: Mechanical Engineering 326, 326H, 316T. Prerequisite: Chemistry 301, Mathematics 408D, and Physics 303K with a grade of at least C- in each, and admission to an engineering honors program.

M E 129S, 229S, 329S, 429S, 529S, 629S, 729S, 829S, 929S. Topics in Mechanical Engineering.

Used to record credit the student earns while enrolled at another institution in a program administered by the University's Study Abroad Office. Credit is recorded as assigned by the study abroad adviser in the Department of Mechanical Engineering. University credit is awarded for work in an exchange program; it may be counted as coursework taken in residence. Transfer credit is awarded for work in an affiliated studies program. May be repeated for credit when the topics vary.

M E 330. Fluid Mechanics.

Fluid properties, statics, conservation laws, inviscid and viscous incompressible flow, flow in confined streams and around objects. Three lecture hours a week for one semester. Prerequisite: Engineering Mechanics 306, Mathematics 427J or 427K, and Mechanical Engineering 316T or 326 or 326H, with a grade of at least C- in each; and credit or registration for Mechanical Engineering 130L.

M E 130L. Experimental Fluid Mechanics.

Experimental design concepts, uncertainty analysis, and systems analysis as applied to thermodynamics, fluid mechanics, and heat transfer systems. One lecture hour and two laboratory hours a week for one semester. Prerequisite: Credit or registration for Mechanical Engineering 330.

M E 333H. Engineering Communication: Honors.

Professional communication skills for engineers, with emphasis on research, writing, editing, and oral presentation on topics of social and technical significance in engineering. Students collaborate to publish an online journal. Two lecture hours and two laboratory hours a week for one semester. Mechanical Engineering 333H and 333T may not both be counted. Prerequisite: Rhetoric and Writing 306 with a grade of at least C-, and admission to an engineering honors program.

M E 333T. Engineering Communication.

Professional communication skills for engineers, with emphasis on research, writing, and oral presentation on topics of social and technical significance in engineering. Two lecture hours and two laboratory hours a week for one semester. Mechanical Engineering 333H and 333T may not both be counted. Prerequisite: Rhetoric and Writing 306 with a grade of at least C-.

M E 334. Materials Engineering.

Fundamental aspects of the structure, properties, and behavior of engineering materials. Three lecture hours a week for one semester. Prerequisite: The following courses with a grade of at least C- in each: Chemistry 301, Mechanical Engineering 302, Physics 303K, Physics 103M; and credit or registration for Mechanical Engineering 134L, Physics 303L, 103N, and Engineering Mechanics 319.

M E 134L. Materials Engineering Laboratory.

Hands-on experiments in materials science and engineering topics and microstructure-property relationships discussed in Mechanical Engineering 334. One lecture hour and three laboratory hours a week for one semester. Prerequisite: Mechanical Engineering 302 with a grade of at least C-, credit or registration for Mechanical Engineering 334 and Engineering Mechanics 319.

M E 335. Engineering Statistics.

Fundamentals of probability, distribution theory, data analysis and statistics, interval estimation, hypothesis testing, and statistical quality control. Three lecture hours and one discussion hour a week for one semester. Prerequisite: Mathematics 408D with a grade of at least C- and credit or registration for Mechanical Engineering 318M.

M E 336. Materials Processing.

Effects of processing on materials properties; materials selection. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 334 (or 311) and 134L (or 111L) or the equivalent and Engineering Mechanics 319 with a grade of at least C- in each.

M E 136L. Materials Processing Laboratory.

Hands-on study of selected materials processing procedures and processing-microstructure-property relationships discussed in Mechanical Engineering 336. One lecture hour and three laboratory hours a week for one semester. Prerequisite: Mechanical Engineering 111L and Engineering Mechanics 319 with a grade of at least C- in each, concurrent enrollment in Mechanical Engineering 336.

M E 136N, 236N. Concepts in Nuclear and Radiation Engineering.

Restricted to students in the Colleges of Engineering, Liberal Arts, and Natural Sciences, and the Jackson School of Geosciences. For Mechanical Engineering 136N, one lecture hour a week for one semester; for 236N, the equivalent of two lecture hours a week for one semester. Prerequisite: Completion of at least thirty semester hours of college coursework, or consent of instructor.

M E 336P. Concepts in Nuclear and Radiation Engineering.

Introduces the many different aspects and applications of nuclear and radiation engineering/physics. Subjects covered include: history of nuclear development, basic concepts of radiation and radioactivity, radioactive waste management, global warming and the impact of nuclear power plants, industrial applications, health physics, nuclear medicine, job opportunities at power plants, non-proliferation, nuclear security, discussion of opportunities for graduate schools at national laboratories, tour of University of Texas nuclear research reactor along with three introductory laboratories. Three lecture hours a week for one semester. Mechanical Engineering 336P and 379M (Topic: Concepts in Nuclear and Radiation Engineering) may not both be counted. Prerequisite: For engineering majors, Physics 303L and 103N with a grade of at least C- in each; for others, upper-division standing.

M E 337C. Introduction to Nuclear Power Systems.

Radioactivity, nuclear interactions: fission and fusion, fission reactors, nuclear power systems, nuclear power safety. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 218 and Physics 303L and 103N with a grade of at least C- in each; for others, upper-division standing and written consent of instructor.

M E 337F. Nuclear Environmental Protection.

Ionizing radiation and its interactions with matter and living tissues; radioactive decay kinetics; external and internal dose measurement; transportation through the environment; managing radioactive waste streams; and safeguards. Three lecture hours a week for one semester. Mechanical Engineering 337F and 389C may not both be counted. Prerequisite: For engineering majors, Physics 303L and 103N with a grade of at least C- in each; for others, upper-division standing.

M E 337G. Nuclear Safety and Security.

An investigation of policy and technical aspects related to nuclear safety and security. Participants will evaluate the proliferation of risk from facilities within the nuclear fuel cycle. They will calculate the criticality conditions for a nuclear assembly and derive parent/daughter decay equations. Nuclear forensics evaluations will be conducted on real-world environmental measurements. Three lecture hours a week for one semester. Only one of the following may be counted: Mechanical Engineering 337G, 388H, Operations Research and Industrial Engineering 390R (Topic 15: Nuclear Safety and Security). Prerequisite: For engineering majors, Physics 103N and 303L with a grade of at least C- in each; for others, upper-division standing and written consent of instructor.

M E 338. Machine Elements.

Analysis for the design and manufacture of basic mechanical elements, and their role in the design of machines; application of finite element modeling. Three lecture hours a week for one semester. Prerequisite: Engineering Mechanics 319 and Mechanical Engineering 334 with a grade of at least C- in each.

M E 339. Heat Transfer.

Steady and transient heat conduction; forced and natural convection; radiation; introduction to heat exchangers and applications. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 218 or 318M, 330, and 130L with a grade of at least C- in each; and credit or registration for Mechanical Engineering 139L.

M E 139L. Experimental Heat Transfer.

Experimental design concepts, uncertainty analysis, and systems analysis as applied to thermodynamics, fluid mechanics, and heat transfer systems. One lecture hour and two laboratory hours a week for one semester. Prerequisite: Credit or registration for Mechanical Engineering 339.

M E 340. Mechatronics.

Theory and application of electrical circuits, electronics, and electromechanical devices; concepts in electrical power transmission; instrumentation; feedback; integration of electronics and instrumentation with mechanical engineering systems (mechatronics). Three lecture hours a week for one semester. Prerequisite: Mathematics 408D, Physics 303L, and 103N with a grade of at least C- in each; and credit or registration for Mechanical Engineering 140L.

M E 140L. Mechatronics Laboratory.

Hands-on laboratory using hand-held and bench-top electronic test and prototyping equipment for circuits and mechatronics applications; computer-aided instrumentation and data acquisition; laboratory study in design, prototyping, and testing with electrical and electronics components and electromechanical devices. One lecture hour and two laboratory hours a week for one semester. Prerequisite: Credit or registration for Mechanical Engineering 340.

M E 343. Thermal-Fluid Systems.

Analysis and design of integrated systems involving simultaneous application of thermodynamics, heat transfer, and fluid mechanics. Applications to power generation, vehicle engineering, materials processing, environmental control, and manufacturing. Three lecture hours and one discussion hour a week for one semester. Prerequisite: Mechanical Engineering 330, 130L, 339, and 139L with a grade of at least C- in each.

M E 344. Dynamic Systems and Controls.

Lumped physical system models; electrical, fluid, mechanical, and thermal system analysis; linear system transient, steady-state behavior; introduction to feedback control. Three lecture hours a week for one semester. Prerequisite: Mathematics 427J or 427K, Mechanical Engineering 205 or 318M, and 324 with a grade of at least C- in each; Mechanical Engineering 340 and 140L with a grade of at least C- in each; and credit or registration for Mechanical Engineering 144L or 244L.

M E 144L, 244L. Dynamic Systems and Controls Laboratory.

Modeling of engineering systems, digital simulation, and assessment of results with experimental study; methods for analysis of first- and second-order systems, system identification, frequency response and feedback control principles; hands-on experimentation with mechanical, fluid, electrical, and magnetic systems; data acquisition and analysis using oscilloscopes and microcomputer-based analog-to-digital and digital-to-analog conversion; theoretical and practical principles governing the design and use of various sensors and transducers. For 144L, one lecture hour and two laboratory hours a week for one semester; for 244L, one lecture hour and three laboratory hours a week for one semester. Prerequisite: Credit or registration for Mechanical Engineering 344.

M E 347. Processing of Materials.

Analysis of forces in processing operations; effects of friction and their control; metalworking efficiencies. Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: For engineering majors, Mechanical Engineering 334 or the equivalent; for nonengineering majors, upper-division standing and written consent of instructor.

Topic 1: Powder Processing. Powder particle characterization and size/shape/distribution, powder synthesis, compaction, sintering theory, sintering maps, full-density processing, powder-processed part microstructure and properties.
Topic 2: Deformation Processing. Analysis of forces in processing operations; effects of friction and their control; slab method; upper-bound force theory; slip-line field theory; metalworking efficiencies.

M E 348E. Advanced Mechatronics I.

Integrated use of mechanical, electrical, and computer systems for information processing and control of machines and devices. System modeling, electromechanics, sensors and actuators, basic electronics design, signal processing and conditioning, noise and its abatement, grounding and shielding, filters, and system interfacing techniques. Three lecture hours and two laboratory hours a week for one semester. Mechanical Engineering 348C and 348E may not both be counted. Prerequisite: For engineering majors, Mechanical Engineering 340 or the equivalent; for nonengineering majors, upper-division standing and written consent of instructor.

M E 348F. Advanced Mechatronics II.

Interfacing microcomputers with sensors and actuators; hybrid (analog/digital) design; digital logic and analog circuitry; data acquisition and control; microcomputer architecture, assembly language programming; signal conditioning, filters, analog-to-digital and digital-to-analog conversion. Three lecture hours and two laboratory hours a week for one semester. Mechanical Engineering 348D and 348F may not both be counted. Prerequisite: For engineering majors: Mechanical Engineering 340 or the equivalent; for nonengineering majors: upper-division standing and written consent of instructor.

M E 349. Corrosion Engineering.

Corrosion principles; electrochemical, environmental, and metallurgical effects; types of corrosion; corrosion testing and prevention; modern theories: principles and applications. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 334 (or 311) or the equivalent with a grade of at least C-, Mechanical Engineering 326 (or 326H) or the equivalent with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 350. Machine Tool Operations for Engineers.

Hands-on manual and computer-numerical-controlled machine tool operation. Part design and tool selection for production. One lecture hour and six laboratory hours a week for one semester. Mechanical Engineering 350 and 379M (Topic 7: Machine Tool Operations for Engineers) may not both be counted. Offered on the letter-grade basis only.

M E 350R. Robot Mechanism Design.

Studies the analysis and synthesis of motions of mechanisms in order to design robotic systems. Examines motion properties of mechanisms including degrees of freedom, velocity, and acceleration. Explores ideas and motion analysis for robotic systems for a wide range of applications including spatial, industrial and medical robotics. Three lecture hours a week for one semester. Mechanical Engineering 350R and 379M (Topic: Robot Mechanism Design) may not both be counted. Prerequisite: Engineering Mechanics 306, and Mechanical Engineering 218 or 318M and 314D or 324, with a grade of at least C- in each.

M E 352K. Engineering Computer Graphics.

Introduction to interactive computer graphics as a tool in computer-aided design. Use of graphics software packages. Two lecture hours and three laboratory hours a week for one semester. Prerequisite: For non-engineering majors, upper-division standing and written consent of instructor.

M E 353. Engineering Finance.

Evaluating the financial impact of engineering decisions. Comparing alternatives with cash flow analysis considering rate of return, inflation, and taxes, with emphasis on analyzing risk. Managing complex projects with activity scheduling and resource allocation considering cash flows. Methods include probabilistic analysis and simulation. Three lecture hours and two discussion hours a week for one semester. Prerequisite: Mathematics 408D, Mechanical Engineering 205 or 318M, and 335 with a grade of at least C- in each.

M E 354. Introduction to Biomechanical Engineering.

The application of mechanical engineering principles to problems in the life sciences; transport phenomena of physiological solids and fluids; biosignal analysis and instrumentation; biomaterials design and compatibility; principles of medical imaging, diagnostics, and therapeutics; rehabilitation engineering. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mathematics 427J or 427K with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 354M. Biomechanics of Human Movement.

Modeling and simulation of human movement; neuromuscular control; computer applications; introduction to experimental techniques. Three lecture hours a week for one semester. Prerequisite: For non-engineering majors, upper-division standing and written consent of instructor.

M E 355K. Engineering Vibrations.

Time-domain and frequency-domain analysis of vibrating systems; matrix methods, instrumentation, and vibration control; numerical methods. Three lecture hours a week for one semester. Prerequisite: Mathematics 427J or 427K, and Mechanical Engineering 324 with a grade of at least C- in each.

M E 259, 359. Materials Selection.

Description of commercial metals, polymers, ceramics, concrete, and wood for use in mechanical engineering applications. Applications include strength, toughness, stiffness, fatigue, creep, corrosion, casting, forming, machining, and welding. Two or three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 334 or the equivalent; for nonengineering majors, upper-division standing and written consent of instructor.

M E 360. Vehicle System Dynamics and Controls.

Fundamentals of ground vehicle dynamics, tire-road mechanics, vehicle control systems, vehicle stability, and simulation of vehicle systems. Three lecture hours a week for one semester. Only one of the following may be counted: Mechanical Engineering 360, 379M (Topic: Vehicle System Dynamics and Controls), 390, 397 (Topic: Vehicle System Dynamics and Controls). Prerequisite: For engineering majors, Mechanical Engineering 344 with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 360C. Cyber Vehicle Systems.

Study of the engineering principles of autonomous mobile robots. Subjects include understanding the dynamics of vehicle systems, and the principles and practical implementation of sensing, actuation, and control. Emphasis on providing practical laboratory study of these subjects using mobile robot platforms, and the use of the commercial software package LabVIEW for programming of real-time data acquisition and control targets. Simulation studies may also be conducted in LabVIEW and/or the Matlab environment, so some proficiency in use of both of these software packages is expected. Three lecture hours a week for one semester. Only one of the following may be counted: Mechanical Engineering 360C, 379M (Topic: Cyber Vehicle Systems), 390C, 397 (Topic: Cyber Vehicle Systems). Prerequisite: For engineering majors, Mechanical Engineering 344 with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 260K, 360K. Metallurgy of Engineering Alloys.

Microstructure and property relationships of metals and alloys; steel alloys; aluminum alloys; titanium alloys; magnesium alloys; solidification and casting; thermomechanical processing; heat treating and solid-state phase transformations. Two or three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 334 (or 311) or the equivalent with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 360L. Turbomachinery and Compressible Flow.

Positive displacement and dynamic rotating machinery; pumps, compressors, and turbines; performance characteristics and scaling laws. One-dimensional compressible flow with area change, friction, or heat addition. Normal and oblique shock waves; Prandtl-Meyer expansion. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 330, 130L and 139L.

M E 360N. Intermediate Heat Transfer.

Multidimensional and transient diffusion; laminar and turbulent convection; radiation exchange; special topics. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 339.

M E 361E. Nuclear Reactor Operations and Engineering.

Fission and chain reactions; neutron diffusion and moderation; reactor equations; Fermi Age theory; and multigroup and multiregional analysis. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 218 and Physics 303L and 103N with a grade of at least C- in each; for others, upper-division standing and written consent of instructor.

M E 361F. Radiation and Radiation Protection Laboratory.

Introduction to the application of radiation and radiation protection instrumentation. Lecture and laboratory topics include personnel monitoring, radiation detection systems, gamma-ray spectroscopy, determination of environmental radiation, counting statistics, gamma and neutron shielding, and air sampling. Two lecture hours and three laboratory hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 218 with a grade of at least C-, Physics 303L and 103N with a grade of at least C- in each; for others, upper-division standing and written consent of instructor.

M E 261M, 361M. Materials Thermodynamics.

First and second laws; heat of combustion; heat engine cycles; chemical equilibria and/or phase equilibria; point defects in crystals. Two or three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 334 (or 311) or the equivalent with a grade of at least C-, Mechanical Engineering 326 or 326H with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 362K. Readings in Engineering.

A study of the interrelated problems of society, technology, and energy. Three lecture hours a week for one semester. Only one of the following may be counted: Mechanical Engineering 325L, 362K, 371K, 177K, 277K, 377K.

M E 363L. Energy Systems Laboratory.

Experimental analysis of thermal energy systems, including heat transfer equipment, engines, the University chilling station and the University power plant. Use of a variety of industrial instrumentation for assessment of system and component performance and of experimental uncertainty. Written and oral technical communication of experimental results. Two lecture hours and three laboratory hours a week for one semester. Prerequisite: Mechanical Engineering 339 and 139L.

M E 363M. Energy Technology and Policy.

An overview of energy technologies, fuels, environmental impacts and public policies. Subjects are interdisciplinary and include an introduction to quantitative concepts in energy, including the differences among fuels and energy technologies, energy policy levers, and the societal aspects of energy, such as culture, economics, war, and international affairs. Includes brief snippets of energy history, use of real-world examples, and looks forward into the future. Interactive and lecture-oriented around current events related to energy. Three lecture hours a week for one semester. Mechanical Engineering 363M and 379M (Topic: Energy Technology and Policy) may not both be counted. Prerequisite: Upper-division standing.

M E 364D. Intermediate Dynamics.

Focuses on efficient formulation and solution of equations of motion for complex 3D multi-body mechanical systems. Emphasizes the formulation of the dynamical equations of motion using Kane's method and will use symbolic and numerical simulation techniques (MATLAB(R) and MotionGenesis) to solve these equations. Preparation for advanced research and professional work analyzing the dynamics of complex multi-body mechanical systems. Three lecture hours a week for one semester. Mechanical Engineering 364D and 379M (Topic: Intermediate Dynamics) may not both be counted. Prerequisite: Upper-division standing and the following courses with a grade of at least a C-: Mechanical Engineering 314D or equivalent and 318M or equivalent.

M E 364L. Automatic Control System Design.

Feedback principles; control components; industrial compensators; Routh, Nyquist, Bode, and root locus methods; controller design; continuous and discrete time control. Three lecture hours and one-half laboratory hour a week for one semester. Prerequisite: Mechanical Engineering 344.

M E 365E. Engineering Entrepreneurship.

Focus on developing a basic understanding for the assessment of emerging technologies including the analysis of the status and future development issues, establish a comprehension of what 'market' means in terms of potential technology applications, and of how that market is identified and characterized. Create new knowledge about the potential match of an emerging technology with a defined market as a member of a multidisciplinary team, establish a basic understanding of IP rights, assessment and strategy related to emerging technology, and assess the course and participate in discussions about how it can be evolved for future offerings. Exploration the innovation and technology commercialization process especially as it relates to individual expertise and career goals. Three lecture hours a week for one semester. Mechanical Engineering 365E and 379M (Topic: Engineering Entrepreneurship) may not both be counted. Prerequisite: Upper-division standing.

M E 365K. Finite Element Method.

Introduction and application of the finite element method in engineering analysis and design problems; demonstration of techniques using commercial codes. Three lecture hours a week for one semester. Prerequisite: Engineering Mechanics 319 and Mathematics 427J or 427K with a grade of at least C- in each.

M E 365L. Industrial Design for Production.

Current techniques for making transitions from theoretical concepts to cost effective designs suitable for manufacturing. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 338.

M E 366J. Mechanical Engineering Design Methodology.

An examination of structured methodologies for designing mechanical systems; reverse engineering/redesign projects and conceptual design projects. Three lecture hours and two laboratory hours a week for one semester. Prerequisite: The following coursework with a grade of at least C- in each: Mechanical Engineering 302, 330, 130L, 335, 338, 339, 139L, 340, and 140L; one of the following with a grade of at least C-: Mechanical Engineering 333H, 333T, Aerospace Engineering 333T, Biomedical Engineering 333T, Chemical Engineering 333T, Civil Engineering 333T, Electrical Engineering 333T, or Petroleum and Geosystems Engineering.

M E 266K. Mechanical Engineering Design Project.

Creative design, analysis, selection, development, and fabrication of engineering components and systems. Development of team project with faculty adviser and sponsoring engineer. Two lecture hours a week for one semester, with additional hours to be arranged. Prerequisite: Mechanical Engineering 344, 144L or 244L, 353, and 366J with a grade of at least C- in each.

M E 366L. Operations Research Models.

Same as Operations Research and Industrial Engineering 366. Formulation and solution-interpretation for operations research models requiring, for example, optimization, simulation, or analysis of Markov chains or queues. Applications include manufacturing design and control, routing and scheduling, plant location, inventory analysis, and management of queueing systems. Three lecture hours a week for one semester. Mechanical Engineering 366L and Operations Research and Industrial Engineering 366 may not both be counted. Prerequisite: For engineering majors, Mathematics 408D and Mechanical Engineering 318M with a grade of at least C- in each; for non-engineering majors, upper-division standing and written consent of instructor.

M E 266P. Design Project Laboratory.

Development of individual team project in association with faculty adviser and sponsoring project engineer. Four laboratory hours a week for one semester. Prerequisite: Mechanical Engineering 344, 144L or 244L, 353, and 366J with a grade of at least C- in each.

M E 366Q. Deterministic Methods for Operations Research.

Theory and algorithms for deterministic operations research methods. Algorithms for solving linear, integer, and nonlinear optimization models. Three lecture hours a week for one semester. Prerequisite: For non-engineering majors, upper-division standing and written consent of instructor.

M E 366R. Stochastic Methods for Operations Research.

Theory and algorithms for stochastic operations research methods. Algorithms related to stochastic processes: Markov chain analysis; queueing theory; stochastic inventory theory and decision analysis. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 335 or the equivalent; for non-engineering majors, upper-division standing and written consent of instructor.

M E 366T. Biomems and Bionems.

Micro/Nano technology has been used to create many new materials and devices with a vast range of applications in materials science, electronics and photonics, and biomedical applications. BioMEMS and BioNEMS is the application of micro/nano technology in the fields of biomedical and health sciences by offering advantages of small size (from submicron to a few mm), low cost, high throughput, and importantly requiring much less sample/reagent. Three lecture hours a week for one semester. Mechanical Engineering 366T and 379M (Topic: Biomems and Bionems) may not both be counted. Prerequisite: Upper-division standing.

M E 367S. Simulation Modeling.

Same as Operations Research and Industrial Engineering 367. Basic concepts of discrete-event simulation. Statistical input and output analysis. Application of simulation software. Modeling of systems under uncertainty. Three lecture hours a week for one semester. Mechanical Engineering 367S and Operations Research and Industrial Engineering 367 may not both be counted. Prerequisite: For engineering majors, Mechanical Engineering 318M with a grade of at least C-, Mechanical Engineering 335 or the equivalent; for non-engineering majors, upper-division standing and written consent of instructor.

M E 368C. Additive Manufacturing.

Additive manufacturing (AM) is the use of layer-based processes for producing parts directly from computer (CAD) models, without part-specific tooling. Students learn about a variety of additive manufacturing (AM) AM technologies, their potential to support rapid prototyping and manufacturing, and some of of the important research challenges associated with AM. Three lecture hours a week for one semester. Mechanical Engineering 368C and 379M (Topic: Additive Manufacturing) may not both be counted. Prerequisite: Grade of at least C- or registration for Mechanical Engineering 366J.

M E 368J. Computer-Aided Design.

Application of computers to design problems and simulation of mechanical systems; creation of interactive special applications programs. Three lecture hours and two laboratory hours a week for one semester. Prerequisite: Credit or registration for Mechanical Engineering 338.

M E 369L. Introduction to Computational Fluid Dynamics.

Applied numerical analysis, including solution of linear algebraic equations and ordinary and partial differential equations; modeling of physical processes, including fluid flow and heat and mass transfer; use of general purpose computer codes, including commercial computational fluid dynamics software packages. Three lecture hours a week for one semester. Only one of the following may be counted: Aerospace Engineering 347, Computational Engineering 347, Mechanical Engineering 369L. Prerequisite: Credit or registration for Mechanical Engineering 330 and 339.

M E 369M. Computational Methods in Thermal/Fluid Systems.

Use of basic tools of computational mathematics to set up numerical simulations for a variety of problems in thermo fluids. Explicit versus implicit time-stepping schemes, the issues of numerical stability and numerical errors, the issue of computational costs, difficulties with boundary and initial conditions, basic decision paths in the choice of numerical methods depending on the target system, and design of diagnostic steps. Three lecture hours a week for one semester. Mechanical Engineering 369M and 379M (Topic: COMPUT METH THERMAL/FLUID SYS) may not both be counted. Prerequisite: Upper-division standing.

M E 369P. Application Programming for Engineers.

Designed for students who have some experience in programming and are interested in the sharing and development of open source software applications. Provides an introduction to the Python Programming language, an open source, flexible, and intuitive debug programming language, with an emphasis on system modeling, simulation, data analysis, and software/data management. Students will create mini projects in Python that demonstrate software design and organization, debugging, open source practices, and data visualization. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 318M or the equivalent with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 371D. Medical Device Design and Manufacturing.

Explores how to solve medical device design problems using systematic design thinking and practices. Interpret clinical needs and define an open engineering medical device design problem, including formulating engineering requirements/specifications to address a marketable need, generate concepts in a way that promotes both creativity and usefulness, make well-informed, well-justified design decisions in the early and later stages of design, design and analyze experiments, follow statistical best practices in Design of Experiments(DoE), embody solutions with "Design for X" considerations, and communicate intermediate and final designs clearly and effectively in written and oral formats. Three lecture hours a week for one semester. Mechanical Engineering 371D and 379M (Topic: Medical Device Design and Manu) may not both be counted. Prerequisite: Upper-division standing.

M E 371K. Legal Aspects of Engineering Practice.

Legal considerations in the practice of engineering; specifications and contracts for equipment and engineering services. Three lecture hours a week for one semester. Only one of the following may be counted: Mechanical Engineering 325L, 362K, 371K, 177K, 277K, 377K. Prerequisite: Upper-division standing.

M E 372J. Robotics and Automation.

Component technologies for precision machines based on dynamic modeling and motion programming: cams, linkages, planar robot manipulators and open architecture vehicles. Homework includes 15 simulations. Three lecture hours a week for one semester. Prerequisite: Upper-division standing and credit or registration for Mechanical Engineering 324.

M E 372M. Mechanism Design.

Design of planar mechanisms for applications that require rigid body guidance, function generation, and path generation. Graphical and analytical techniques. Computer-aided design projects. Three lecture hours a week for one semester. Prerequisite: Credit or registration for Mechanical Engineering 324.

M E 372N. Design of Smart Mechanisms.

Design of reprogrammable multiple-degree-of-freedom architectures. The course addresses various mechanical configurations and stresses the integrated design approach to sensing/actuation/control architecture and control software. Three lecture hours a week for one semester. Prerequisite: Upper-division standing and consent of instructor.

M E 373K. Basic Industrial Engineering.

Same as Operations Research and Industrial Engineering 371. Design and analysis of production systems, including plant layout and location, material flow, and flexible manufacturing. Three lecture hours a week for one semester. Mechanical Engineering 373K and Operations Research and Industrial Engineering 371 may not both be counted. Prerequisite: For engineering majors, Mechanical Engineering 318M or the equivalent with a grade of at least C-, and Mechanical Engineering 335 or the equivalent; for non-engineering majors, upper-division standing and written consent of instructor.

M E 374C. Combustion Engine Processes.

Principles of internal combustion engines, fuels, carburetion, combustion, exhaust emissions, knock, fuel injection, and factors affecting performance. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 339 or consent of instructor.

M E 374D. Automotive Engineering Laboratory.

Engines and emissions. Students use commercial engine-modeling software to explore effects of valve timing and intake tuning and conduct experiments with vehicle emissions, ignition timing, engine mechanisms, engine controls, and emissions control. One lecture hour and four laboratory hours a week for one semester. Prerequisite: Credit or registration for Mechanical Engineering 374C.

M E 374E. Race Car Engineering and Project Management.

Explores designing a Formula SAE race car, a hot rod (UT's 1937 Chevy project), and a Formula SAE Electric race car. Divided into four major sections: Project Management, including tools for project organization and management, Powertrain, including engine basics, calibration, intake and exhaust design, cooling and oiling systems, fuel economy and emissions, transmission/differential, vehicle performance modeling, Brake systems, longitudinal weight transfer, longitudinal force requirements of the tires for both braking and acceleration, tires and tire models, and Vehicle dynamics (suspension systems, anti-roll bars, lateral weight transfer, tires and tire models). Three lecture hours a week for one semester. Mechanical Engineering 374E and 379M (Topic: RACECAR ENGR & PROJ MANAGEMENT) may not both be counted. Prerequisite: The following courses with a grade of at least a C- in each: Mechanical Engineering 330 and 130L; and credit or registration for 339 and 139L.

M E 374F. Fire Science.

Analysis of the dynamics and consequences of fire in structures. Topics include combustion thermochemistry, premixed and diffusion flames, fluid mechanics of fire, human tenability in burning structures, and computer modeling of fires. Three lecture hours a week for one semester. Prerequisite: For engineering majors, upper-division standing and credit or registration for Mechanical Engineering 339 and 139L with a grade of at least C- in each; for others, upper-division standing and written consent of instructor.

M E 374L. Design of Thermal Systems.

Methodology and approach to design of thermal energy systems; component and system modeling; optimization, including economic considerations. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 339 or the equivalent.

M E 374R. Design of Air Conditioning Systems.

Load calculations, design of thermal distribution systems, component selection and control. Three lecture hours a week for one semester. Prerequisite: Credit or registration for Mechanical Engineering 339.

M E 374S. Solar Energy Systems Design.

Insolation characteristics and measurement, component design, solar energy system modeling, introduction to photovoltaic systems, cost analysis, and case studies. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 339 or the equivalent.

M E 374T. Renewable Energy Technology.

Cultivates an enhanced level of theoretical and conceptual understanding of thermodynamics, fluid mechanics and heat transfer, and of how these disciplines apply to the design and analysis of complex thermal-fluid systems. Enhances skills in designing, programming and debugging software tools for systems analysis, working in teams, and communicating engineering results in a professional manner. Three lecture hours a week for one semester. Mechanical Engineering 374T and 379M (Topic: Renewable Energy Technology) may not both be counted. Prerequisite: The following courses with a grade of at least a C- in each: Mechanical Engineering 316T, 318M, 330, 130L, 339, and 139L.

M E 375K. Production Engineering Management.

Same as Operations Research and Industrial Engineering 372. Introduction to production and inventory models; basic factory dynamics; analysis of variability; push-and-pull production control; sequencing and dispatching. Three lecture hours a week for one semester. Mechanical Engineering 375K and Operations Research and Industrial Engineering 372 may not both be counted. Prerequisite: For engineering majors, Mechanical Engineering 318M or the equivalent with a grade of at least C-, Mechanical Engineering 335 or the equivalent; for non-engineering majors, upper-division standing and written consent of instructor.

M E 376N. High Throughput Nanopatterning.

Introduction to the basic tools and materials involved in the patterning processes needed to create nano-scale structures and functional materials and discusses the relevance of these processes to applications in the electronics, display, and energy industries. Includes take-home portable nano-labs which allow hands-on experience in nano-scale fabrication processes and relevant nanometrology techniques. Explores industry and research roadmaps that provide relevant metrics and timelines for fabrication, materials, nano-enabled components and devices. Exposure to relevant computational modeling and simulation tools allows exploration of novel nano-enabled components and devices. Three lecture hours a week for one semester. Mechanical Engineering 376N and 379M (Topic: High Throughput Nanopatterning) may not both be counted. Prerequisite: Upper-division standing.

M E 177K, 277K, 377K. Projects in Mechanical Engineering.

Independent project carried out under the supervision of a faculty member in mechanical engineering. Student prepares a project proposal and a final report, each of which is evaluated by the faculty committee on individual projects. For 177K, three to five laboratory hours and one consultation hour with the faculty supervisor a week for one semester; for 277K, five to ten laboratory hours and one consultation hour with the faculty supervisor a week for one semester; for 377K, ten to fifteen laboratory hours and one consultation hour with the faculty supervisor a week for one semester. Only one of the following may be counted: Mechanical Engineering 325L, 362K, 371K, 177K, 277K, 377K. Prerequisite: A University grade point average of at least 2.50 and a grade point average in the major of at least 2.50; and approval of project proposal by the faculty committee on individual projects.

M E 378C. Electroceramics.

Bonding; crystal structures; defects; phase diagrams; glass ceramics; electrical, dielectric, magnetic, and optical ceramics. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 334 (or 311) or the equivalent with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 378D. Failure Analysis.

Introduction to methodology of analyzing failures of engineering parts and devices. Explores a broad range of analysis, but the focus is on understanding fractography and relating this back to material and mechanics relevant to failure to determine the likely root cause(s). Lectures are primarily based on case studies and are supplemented by two hands-on class projects, one performed individually and the other larger project performed as a team project. Three lecture hours a week for one semester. Mechanical Engineering 378D and 379M (Topic: Failure Analysis) may not both be counted. Prerequisite: For engineering majors, the following courses with a grade of at least a C- in each: Engineering Mechanics 319, Mechanical Engineering 334 and 134L or equivalent.

M E 378E. Nanotechnology for Sustainable Energy.

Demonstrates the role of nanoscale materials in solving one of the most critical socio-economic issues of our time, affordable and sustainable energy. An overview of emerging nanotechnology, and how people can critically impact many energy technologies (from energy harvesting, conversion, to storage). Explores various types of energy devices, including solar cell, solar fuel, piezoelectrics, thermoelectrics, battery, supercapacitor, and fuel cell as well as basic device principles, current technology status and new opportunities of nanotechnology for energy device applications. Content is at the intersection of nanoscale science and engineering, and energy science and technology. Three lecture hours a week for one semester. Mechanical Engineering 378E and 379M (Topic: NANOTECH FOR SUSTAINABL ENERGY) may not both be counted. Prerequisite: Upper-division standing, and the following courses with a grade of at least C-: Chemistry 301, Mechanical Engineering 334 or equivalent, Physics 303L and 103N.

M E 378K. Mechanical Behavior of Materials.

Elastic deformation; viscoelasticity; yielding, plastic flow, plastic instability, strengthening mechanisms; fracture, fatigue, creep; significance of mechanical properties tests. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 334 or the equivalent and 134L with a grade of at least C- in each; for others, upper-division standing and written consent of instructor.

M E 378P. Properties and Applications of Polymers.

Introduction to polymers as structural materials: polymerization, polymer structure, physical and mechanical properties, processing and fabrication. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 334 (or 311) or the equivalent with a grade of at least C-, Mechanical Engineering 326 or 326H or the equivalent with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 378Q. Polymer Nanocomposites.

Fundamentals, properties, and applications of polymer nanocomposites. Three lecture hours a week for one semester. Mechanical Engineering 378Q and 379M (Topic: Polymer Nanocomposites) may not both be counted. Prerequisite: Mechanical Engineering 334 and 134L with a grade of at least C-.

M E 378S. Structural Ceramics.

Powder processing, powder characterization, forming techniques, densification, and development of microstructure; emphasis on understanding materials, selection, and microstructure-mechanical property relationships. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 334 (or 311) or the equivalent with a grade of at least C-; for others, upper-division standing and written consent of instructor.

M E 679H. Undergraduate Honors Thesis.

Research performed during two consecutive semesters under the supervision of an engineering faculty member; topics are selected jointly by the student and the faculty member with approval by the director of the Engineering Honors Program. The student makes an oral presentation and writes a thesis. Individual instruction for two semesters. Students pursuing both the Bachelor of Arts, Plan II, and a bachelor's degree in engineering may use this course to fulfill the thesis requirement for the Bachelor of Arts, Plan II. Prerequisite: For 679HA, enrollment in the Engineering Honors Program; for 679HB, Mechanical Engineering 679HA and enrollment in the Engineering Honors Program.

M E 179M, 279M, 379M. Topics in Mechanical Engineering.

For each semester hour of credit earned, the equivalent of one lecture hour a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Prerequisites vary with the topic.

Topic 1: Design of Machines and Systems. Restricted to students in the UTeach Engineering Program. Introduction to techniques for analyzing and designing machine components (linkages, cams, springs, gears, etc.) within the context of reverse engineering and redesigning existing products. Covers the application of structure methods for engineering design and prototyping. Mechanical Engineering 179M, 279M, 379M (Topic 1) and 379M (Topic: Design of Machines and Systems) may not both be counted.

M E 379N. Engineering Acoustics.

Same as Electrical Engineering 363N. Principles of acoustics, with applications drawn from audio engineering, biomedical ultrasound, industrial acoustics, noise control, room acoustics, and underwater sound. Three lecture hours a week for one semester. Prerequisite: Mathematics 427J or 427K with a grade of at least C-.

M E 379Q. Musical Acoustics.

Restricted to students outside the Cockrell School of Engineering. Designed to help students develop the intuition and vocabulary for understanding the basic physical principles relevant to musical instruments and sound (e.g., mechanics, vibrations, acoustics, harmonics, acoustic-electronic conversions, speakers, hearing, perception, room acoustics) in order to be able to read basic articles on the subject of musical acoustics. Material is kept relevant to musical principles (e.g., performance techniques, scales/harmony) throughout. Three lecture hours a week for one semester. Mechanical Engineering 379M (Topic: Musical Acoustics) and 379Q may not both be counted.

Operations Research and Industrial Engineering: ORI

Lower-Division Courses

Upper-Division Courses

ORI 366. Operations Research Models.

Same as Mechanical Engineering 366L. Formulation and solution-interpretation for operations research models requiring, for example, optimization, simulation, or analysis of Markov chains or queues. Applications include manufacturing design and control, routing and scheduling, plant location, inventory analysis, and management of queueing systems. Three lecture hours a week for one semester. Mechanical Engineering 366L and Operations Research and Industrial Engineering 366 may not both be counted. Prerequisite: For engineering majors, Mathematics 408D and Mechanical Engineering 318M with a grade of at least C- in each; for non-engineering majors, upper-division standing and written consent of instructor.

ORI 367. Simulation Modeling.

Same as Mechanical Engineering 367S. Basic concepts of discrete-event simulation. Statistical input and output analysis. Application of simulation software. Modeling of systems under uncertainty. Three lecture hours a week for one semester. Mechanical Engineering 367S and Operations Research and Industrial Engineering 367 may not both be counted. Prerequisite: For engineering majors, Mechanical Engineering 318M with a grade of at least C-, Mechanical Engineering 335 or the equivalent; for non-engineering majors, upper-division standing and written consent of instructor.

ORI 368. Production and Inventory Control.

Issues in inventory control with known and unknown demand, materials requirement planning, just-in-time, pull control systems, operations scheduling, dispatching and aggregate planning, and the basic dynamics of production and inventory control. Three lecture hours a week for one semester. Prerequisite: For engineering majors, Mechanical Engineering 318M or the equivalent with a grade of at least C-, Mechanical Engineering 335 or the equivalent; for others, upper-division standing and written consent of instructor.

ORI 369. Decision Analysis.

Principles and application of techniques for the logical illumination of complex decision problems within any context. Subjects may include utility theory, probability as a statement of belief, risk preference, value of information and control, probability assessment, influence diagrams, risk sharing and scaling, and life-and-death decision making. Three lecture hours a week for one semester. Prerequisite: Mechanical Engineering 353 or equivalent with a grade of at least C-.

ORI 370. Statistical Methods in Manufacturing.

Contemporary concepts and methods for statistical quality design and control will be presented. These include: descriptive statistics, behavior of process over time, design and interpretation of control charts, process capability studies, measurement system analysis, correlation and regression analysis, design and analysis of two level factorial experiments, design and analysis of two level fractional factorial experiments, response surface methodology, and Taguchi approach to robust design. Three lecture hours a week for one semester. Mechanical Engineering 379M (Topic: Stat Methods in Manufacturing) and Operations Research and Industrial Engineering 370 may not both be counted. Prerequisite: For engineering majors, Mechanical Engineering 318M with a grade of at least C-, Mechanical Engineering 335 or the equivalent; for others, upper-division standing and written consent of instructor.

ORI 371. Basic Industrial Engineering.

Same as Mechanical Engineering 373K. Design and analysis of production systems, including plant layout and location, material flow, and flexible manufacturing. Three lecture hours a week for one semester. Mechanical Engineering 373K and Operations Research and Industrial Engineering 371 may not both be counted. Prerequisite: For engineering majors, Mechanical Engineering 318M or the equivalent with a grade of at least C-, and Mechanical Engineering 335 or the equivalent; for non-engineering majors, upper-division standing and written consent of instructor.

ORI 372. Production Engineering Management.

Same as Mechanical Engineering 375K. Introduction to production and inventory models; basic factory dynamics; analysis of variability; push-and-pull production control; sequencing and dispatching. Three lecture hours a week for one semester. Mechanical Engineering 375K and Operations Research and Industrial Engineering 372 may not both be counted. Prerequisite: For engineering majors, Mechanical Engineering 318M or the equivalent with a grade of at least C-, Mechanical Engineering 335 or the equivalent; for non-engineering majors, upper-division standing and written consent of instructor.