Graduate Courses

The faculty has approval to offer the following courses in the academic years 2019–2020 and 2020–2021; however, not all courses are taught each semester or summer session. Students should consult the Course Schedule to determine which courses and topics will be offered during a particular semester or summer session. The Course Schedule may also reflect changes made to the course inventory after the publication of this catalog.

Civil Engineering: C E

C E 380P. Ocean Engineering Principles: Theory and Applications.

Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing; and a course in differential equations and a course in fluid mechanics, or consent of instructor.

Topic 4: Boundary Element Methods. Formulation and numerical implementation of boundary element methods; applications to problems in fluid mechanics, structural analysis, and solid mechanics.
Topic 5: Hydrodynamics of Marine Propulsors and Turbines. Hydrofoil and lifting surface theory, actuator disk and lifting line theory, modeling via vortex lattice, panel methods, and Reynolds-Averaged Navier-Stokes solvers, optimum loading and blade design techniques for propellers and turbines, unsteady blade and shaft forces, and modeling of sheet cavitation. Civil Engineering 380P (Topic 5) and 397 (Topic 32: Hydrodynamics of Propulsors and Dynamic Positioning Systems) may not both be counted. Additional prerequisite: Graduate standing, and consent of instructor and the graduate adviser.

C E 380S. Environmental Fluid Mechanics.

Fundamentals of fluid mechanics applied in natural systems; analysis of energy; momentum, diffusion, turbulence, and stratification in lakes, rivers, and estuaries. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 319F or consent of instructor.

C E 380T. Computational Environmental Fluid Mechanics.

Basics of numerical methods as applied to the solution of the steady and unsteady fluid flow equations, such as the Euler and the Navier-Stokes equations and the advection-diffusion equation. Emphasis on finite volume methods as applied to fluid mechanics problems in civil and environmental engineering. Three lecture hours a week for one semester. Prerequisite: Graduate standing, Civil Engineering 380S or an equivalent graduate course in fluid mechanics, and knowledge of a programming language.

C E 380W. Water Resources Engineering Research Seminar.

Presentations and discussions on various topics in water resources engineering. Three lecture hours a week for one semester. Offered on the credit/no credit basis only. Prerequisite: Graduate standing and consent of instructor.

C E 381E. Design of Energy Efficient and Healthy Buildings.

Design of buildings for low energy use and optimal indoor air quality. Includes ventilation, energy efficiency, moisture problems, and prevention by design. Three lecture hours a week for one semester. Prerequisite: Graduate standing in engineering or consent of instructor.

C E 381P. Computer Methods in Structural Analysis.

Linear and nonlinear analysis of trusses and frames; introduction to structural stability; and computational aspects of linear and nonlinear structural analysis. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 381R. The Finite Element Method.

Introductory concepts; weighted residual methods; strong and weak forms; boundary conditions; global v. local basis functions; error estimates; smooth and nonsmooth problems; one-dimensional second- and fourth-order problems; two-dimensional potential and plate problems; two-dimensional and three-dimensional elasticity; dynamic and eigenvalue problems; numerical, computational, and meshing issues; applications using commercial software. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 381P or consent of instructor.

C E 381T. Numerical Modeling of Physical Systems.

Survey of numerical methods; weighted residuals, finite differences, finite elements, boundary elements; applications to equilibrium, eigenvalue, and propagation problems. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 381W. Introduction to Wave Physics.

An introductory course in the theory and modeling of propagating waves. Subjects may include scalar waves in 1-D and 2-D, traveling and standing waves, flexural waves in beams, dispersion, phase and group velocity, vector waves in 2-D and 3-D, waves in infinite media and semi-infinite media, P waves, SH waves, SV waves, Rayleigh and Love surface waves, Stoneley waves, reflection and transmission at interfaces, numerical modeling, radiation conditions, scattering and radiation from obstacles, and fluid-solid interaction. Three lecture hours a week for one semester. Civil Engineering 381W and 397 (Topic: Wave Propagation Analysis) may not both be counted. Prerequisite: Graduate standing.

C E 382L. Plastic Design in Metals.

Principles and methods of plastic analyses and design, and their applications to continuous beams, frames, plates, connections, and multistory buildings. Three lecture hours a week for one semester. Prerequisite: Graduate standing, Civil Engineering 335, and consent of instructor.

C E 382N. Structural Systems.

Application of systems engineering principles to planning, design, and construction of building and bridge structures with emphasis on performance requirements and economic factors. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 383C. Experimental Methods in Structural Engineering.

Survey of experimental methods used in structural engineering, including loading and measurement techniques and systems used in structural research. Two lecture hours and three laboratory hours a week for one semester. Prerequisite: Graduate standing.

C E 383D. Steel Bridge Design.

Design of steel highway bridges, including the analysis and design of composite girder, box girder, and cable-stayed bridges. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 362N or the equivalent.

C E 383F. Structural Fire Engineering.

Behavior and design of structures subjected to fire; heat transfer fundamentals and modeling of fires; material properties at elevated temperature; structural fire resistance and protection; calculating structure-fire response. Three lecture hours a week for one semester. Civil Engineering 383F and 397 (Topic: Structural Fire Engineering) may not both be counted. Prerequisite: Graduate standing.

C E 383L. Advanced Reinforced Concrete Members.

Behavior of reinforced concrete members; critical review of specifications; limit states; anchorage and development of reinforcement; shear; torsion. Three lecture hours a week for one semester. Prerequisite: Graduate standing, Civil Engineering 331, and consent of instructor.

C E 383N. Advanced Reinforced Concrete Structures.

Behavior of reinforced concrete structures, with emphasis on ductility and detailing of frames, slabs, and braced (shearwall) structures. Detailing for seismic loads. Three lecture hours a week for one semester. Prerequisite: Graduate standing, Civil Engineering 383L, and consent of instructor.

C E 383P. Prestressed Concrete.

Theory, advantages, and limitations; various systems of prestressing; composite construction; continuous span theory. Three lecture hours a week for one semester. Prerequisite: Graduate standing, Civil Engineering 331, and consent of instructor.

C E 383R. Repair and Strengthening of Reinforced Concrete Structures.

Evaluation of condition, strength, serviceability, and ductility of existing structures; criteria for rehabilitation; retrofit techniques for change in function, loading, and seismic forces. Three lecture hours a week for one semester. Civil Engineering 383R and 397 (Topic: Repair and Strengthening of Reinforced Concrete Structures) may not both be counted. Prerequisite: Graduate standing and consent of instructor.

C E 383S. Structural Concrete Bridges.

Planning, design, and construction of reinforced concrete and prestressed concrete bridges, including arch, frame, girder, and cable stay systems; aesthetics, economy, and durability. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and credit or registration for Civil Engineering 383P.

C E 383T. Plasticity in Structural Concrete.

Application of plasticity theory to structural concrete columns, girders, frames, and joints. Development and application of transparent detailing methods such as truss models, strut-and-tie models, and both strip and yield line methods for slabs. Three lecture hours a week for one semester. Prerequisite: Graduate standing, Civil Engineering 383L, and consent of instructor.

C E 384P. Dynamic Response of Structures.

Single and multidegree-of-freedom systems; dynamic load factors, response to harmonic excitation; damping; modal analysis; direct integration of equations of motion; analysis in time and frequency domains; application to earthquake, wind, wave, and traffic loadings. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 381P or consent of instructor.

C E 384R. Earthquake Engineering.

Earthquake characteristics; seismic loads; elastic and inelastic response; analysis and design of buildings for earthquakes. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 384P or consent of instructor.

C E 384S. Structural Reliability.

Load and resistance factors in reliability-based design; first- and second-order reliability methods; Monte Carlo simulation techniques with variance reduction and importance sampling refinements; reliability of systems; fault-tree and event-tree models; inverse reliability procedures; and random fields and stochastic finite element analysis for reliability analysis. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 384T. Blast-Resistant Structural Design.

Physics of explosions and basic blast phenomenology; structural loading due to blast effects; nonlinear dynamic response of blast-loaded structures; protective design; progressive collapse. Three lecture hours a week for one semester. Civil Engineering 384T and 397 (Topic: Blast-Resistant Structural Design) may not both be counted. Prerequisite: Graduate standing and consent of instructor.

C E 385D. Water Resources Planning and Management.

Application of engineering economics and operations research to the planning and management of water systems. Major subjects include water supply, water resources management, multi-objective planning, and optimization techniques. Focus on programming skills and implementation of the models using a programming language. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 385G. Transboundary Water Resources.

Introduction to planning, policy, and development of water resources in the international setting, with emphasis on transboundary situations. Basic concepts of water rights and international law pertaining to transboundary water use and protection; economic analysis and applications to transboundary water resources problems; international development goals and how these relate to water supply and use. Three lecture hours a week for one semester. Civil Engineering 385G and 397 (Topic: Transboundary Water Resources) may not both be counted. Prerequisite: Graduate standing.

C E 385J. Hazardous Waste Management.

Legal and technological approaches to effective and sustainable control of hazardous wastes and contaminated sites, studied through problem evaluation and solution. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 342 or consent of instructor.

C E 385K. Water Quality.

Analysis of water quality in natural systems and of effects of wastewater discharges. Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing.

Topic 1: Stream, Impoundment, and Estuarine Analysis I. Basic physical, chemical, and biological properties of streams, impoundments, estuaries, and coastal waters; methods for analysis of water quality problems. Additional prerequisite: Graduate standing.
Topic 2: Stream, Impoundment, and Estuarine Analysis II. Application of methods of analysis to development of a water quality management plan for a water body in Texas. Additional prerequisite: Graduate standing.
Topic 3: Water Quality Modeling. Mathematical modeling of water quality, including dissolved oxygen, nutrients, and toxic substances in lakes, reservoirs, rivers, and estuaries. Additional prerequisite: Graduate standing.
Topic 4: Water Pollution Ecology. Advanced topics in the application of engineering solutions to ecological problems in freshwater and marine environments.

C E 385L. Water and Wastewater Treatment.

Principles of sustainable treatment of domestic and industrial water, wastewater, and sludges. Three lecture hours or two and one-half lecture hours and one laboratory hour a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing.

Topic 1: Physical and Chemical Treatment. Three lecture hours a week for one semester. Additional prerequisite: Civil Engineering 342 or consent of instructor.
Topic 2: Biological Wastewater Treatment and Sludge Processing. Three lecture hours a week for one semester. Additional prerequisite: Civil Engineering 342 or consent of instructor.
Topic 3: Advanced Treatment Processes. Project-based course addressing advanced topics in treatment process design: alternative designs, computer models, laboratory testing, economics, and least-cost designs. Two and one-half lecture hours and one laboratory hour a week for one semester. Additional prerequisite: Civil Engineering 385L (Topic 1).

C E 385M. Unit Operations in Water and Wastewater Treatment.

Physical, chemical, and biological unit operations for sustainable water and wastewater treatment. One lecture hour and six laboratory hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 385L (Topic 1: Physical and Chemical Treatment or Topic 2: Biological Wastewater Treatment and Sludge Processing) or consent of instructor.

C E 385N. Industrial Wastewater Treatment.

Industrial wastewater characteristics; methods of in-plant control; application of various biological, chemical, and physical processes in practical water pollution control systems. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and credit or registration for Civil Engineering 385L or consent of instructor.

C E 385R. Land Treatment of Wastes.

Principles of the use of land in management of municipal and industrial wastewaters, sludges, and solids; includes problem evaluations. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 342 or consent of instructor.

C E 385S. Stochastic Hydrology.

Probability and statistics applied to the solution of hydrological problems; extreme event frequency analysis, time series analysis of hydrologic data, autocorrelation and spectral analysis, theory of regionalized variables and applications. Three lecture hours a week for one semester. Prerequisite: Graduate standing, and Civil Engineering 311S or an equivalent course in statistical methods.

C E 385W. Drinking Water: Treatment and Public Health Issues.

Fundamentals and applications of drinking water treatment processes, interactions among treatment processes, source water quality, and public health issues. Three lecture hours a week for one semester. Prerequisite: Graduate standing, Civil Engineering 385L (Topic 1: Physical and Chemical Treatment), and consent of instructor.

C E 386M. Water Treatment and Wastewater Treatment Plant Design.

Design of water and wastewater treatment facilities; pumps and hydraulic considerations; design of wastewater collection systems; design of systems for handling and disposal of residuals. Specific facilities may be selected to meet individual interests. Six hours of lecture and design laboratory a week for one semester, with appropriate field trips to operating facilities. Prerequisite: Graduate standing, and credit or registration for Civil Engineering 385L or consent of instructor.

C E 386P. Engineering Fracture Mechanics.

Application of fracture mechanics to fracture-safe design of metal structures; material behavior and analysis of components containing cracks. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 386R. Inelastic Behavior of Materials.

Introduction to theories of inelastic behavior; theory of plasticity; applications to materials such as steel, concrete, and soils; implementation of constitutive equations in structural analysis. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 387C. Geoenvironmental Engineering.

Hydraulic conductivity of soils; clay behavior; compacted clay barriers; unsaturated soil behavior and barriers; geosynthetics and geosynthetic barriers; contaminants and solid waste; liquid drainage layers; stability of landfills; contaminant transport through barriers. Three lecture hours and three laboratory hours a week for one semester. Prerequisite: Graduate standing.

C E 387G. Engineering Geology.

Fundamental concepts of geology, including geologic time and plate tectonics. Interactions among earth materials, landforms, and geologic processes across a range of spatial and temporal scales. Emphasizes common interests shared by engineers and geologists, as well as gaps between the disciplines, such as those posed by the geologic vocabulary. Three lecture hours and three hours of laboratory or fieldwork a week for one semester. Prerequisite: Graduate standing in civil engineering.

C E 387L. Soil Mechanics I.

Three lecture hours a week for one semester; some topics require additional hours. May be repeated for credit when the topics vary. Prerequisite: Graduate standing.

Topic 1: Consolidation and Shearing Properties of Soils. Theoretical and experimental studies of the consolidation and shearing properties of both saturated and unsaturated soils. Three lecture hours and three laboratory hours a week for one semester.
Topic 2: Foundation Engineering. Bearing capacity, design of piers and pile foundations.

C E 387M. Soil Mechanics II.

Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing.

Topic 1: Stability of Earth Slopes. Development and application of limit equilibrium procedures, including effects of seepage, rapid drawdown, and seismic loading and reinforcement for stability analysis of natural and constructed slopes.

C E 387R. Soil Mechanics III.

Three hours a week for one semester; some topics may require additional hours. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 2: Soil and Rock Dynamics. Wave propagation in soil and rock, foundation vibration and isolation, dynamic behavior of soil. Five hours a week for one semester, including lecture and laboratory.
Topic 4: Earth Retaining Structures. Types of earth retaining systems, earth pressure theory; gravity, semi-gravity, and modular walls; reinforcing elements; mechanically stabilized earth walls and reinforced soil slopes; soil nail walls; sheet pile walls, drilled shaft walls and anchored walls; advances in soil reinforcement.
Topic 5: Geotechnical Earthquake Engineering. Application of soil dynamics to earthquake engineering; influence of soil conditions on ground motion characteristics; evaluation of site response using wave propagation techniques; liquefaction of soils; liquefaction mitigation; seismic response of earth structures; seismic slope stability.

C E 387T. Decision, Risk, and Reliability.

Principles and theory for modeling uncertainty in civil engineering, analyzing how uncertainties affect performance, and developing rational bases for design and decision making under uncertain conditions. Three lecture hours a week for one semester. Prerequisite: Graduate standing and an introductory course in probability and statistics.

C E 388N. Engineering and Management of Municipal and Industrial Residuals.

Characterization and collection of solid wastes; biological, chemical, and physical principles and integrated systems applicable to the treatment and disposal of municipal and industrial residuals. Two lecture hours and three discussion hours a week for one semester, with occasional field trips. Prerequisite: Graduate standing in civil or environmental engineering, or graduate standing and consent of instructor.

C E 389C. Advanced Technical Communication for Engineers.

Advanced work in theory and practice of communicating research and design results to a variety of audiences, in print, orally, and through multimedia. Students use their own work and writing projects as the material to communicate. Three hours a week for one semester, including lecture and laboratory. Prerequisite: Graduate standing.

C E 389H. HVAC Design.

Design of heating, ventilation, and air-conditioning systems. Three lecture hours a week for one semester. Prerequisite: Graduate standing and three of the following courses: Architectural Engineering 346N, Civil Engineering 319F, Mechanical Engineering 320, 326, 330, 339.

C E 389T. Indoor Air Quality: Transport and Control.

Transport and control of indoor pollutants. Includes particulate removal and pollutant transport into and within indoor environments. Three lecture hours a week for one semester. Prerequisite: Graduate standing in architectural or civil engineering.

C E 389V. Modeling of Air and Pollutant Flows in Buildings.

Same as Architectural Engineering 389V. Restricted to architectural engineering or civil engineering graduate students. Fundamentals of indoor airflow modeling, use of computational fluid dynamics (CFD) for air quality and thermal comfort analyses, application of CFD for analysis of air velocity, temperature, humidity, and contaminant distributions with different ventilation systems. Three lecture hours a week for one semester. Only one of the following may be counted: Architectural Engineering 383 (Topic: Modeling of Air and Pollutant Flows in Buildings), 389V, Civil Engineering 389V, 397 (Topic: Modeling of Air and Pollutant Flows in Buildings). Prerequisite: Graduate standing; for architectural engineering and civil engineering majors, three semester hours of coursework in fluid dynamics; for others, consent of instructor.

C E 390J. Engineering Microbiology.

Fundamentals of microbiology and biochemistry as applied to environmental pollution and sustainable treatment processes, energetics and kinetics of microbial growth, and biological fate of pollutants; introduction to laboratory techniques. Three hours a week for one semester, including lecture and laboratory. Prerequisite: Graduate standing.

C E 390L. Environmental Analysis.

Advanced analytical procedures for the sampling, monitoring, and analyses of air, liquid, and other wastes. Six hours of lecture and laboratory a week for one semester. Prerequisite: Graduate standing, one year of chemistry, and consent of instructor.

C E 390N. Water Pollution Chemistry.

Advanced topics in the application of engineering solutions to chemical problems in freshwater and marine environments. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 390P. Environmental Organic Chemistry.

Advanced subjects in the environmental chemistry of organic contaminants in groundwater, soil, and air systems; includes sustainable chemistry. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 390Q. Chemical Dynamics in the Environment.

Environmental chemodynamics: interphase equilibrium, reactions, transport processes, and related models for anthropogenic substances across natural interfaces (air-water-sediment-soil) and associated boundary regions. Three lecture hours a week for one semester. Civil Engineering 390Q and 397 (Topic: Chemodynamics) may not both be counted. Prerequisite: Graduate standing.

C E 390R. Engineering Microbiology Applications.

Application of microbiology and molecular biology tools for monitoring environmental systems and biological treatment processes. Six hours of lecture and laboratory a week for one semester. Civil Engineering 390R and 397 (Topic: Engineering Microbiology Applications) may not both be counted. Prerequisite: Graduate standing and Civil Engineering 390J.

C E 391C. Analysis and Design of Transportation Systems I.

Introduction to conceptual, methodological, and mathematical foundations of analysis and design of transportation services; review of probabilistic modeling; application of discrete choice models to demand analysis. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 391D. Analysis and Design of Transportation Systems II.

Operations research techniques for modeling system performance and design of transportation services; routing and scheduling problems, network equilibration, and spatially distributed queueing systems. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 391E. Advances in Transportation Demand Analysis.

Developments in the econometric and behavioral aspects of demand analysis and forecasting; supply-demand integration; dynamic models. Applications to passenger and freight transportation and other infrastructure services. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 391F. Advanced Theory of Traffic Flow.

Relations among traffic variables; distribution functions; single lane and multilane traffic flow; characterization of traffic in cities; kinematic waves; yellow signal dilemma; merging; fuel consumption; emissions; and special topics. Emphasis on the interplay among theory, experimentation, and observation. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 391H. Urban Transportation Planning.

Interrelationship of transportation and the urban environment; methodologies for planning multimodal transportation systems and developing feasible alternatives; emphasis on developing insight into the transportation problem and the planning process rather than on solving specific problems of limited scope. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 391J. Transportation Planning: Methodology and Techniques.

Analysis of a wide range of planning studies to establish the logic and foundation for the transportation planning process. Emphasis on techniques of estimation and forecasting population, economic activity, land use, and mobility patterns; determination of goals and objectives; decision making; economic analysis; and alternative evaluation. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 391L. Advanced Traffic Engineering.

Characterization and analysis of arterial street and freeway traffic operations using theoretical and experimental techniques, especially computer simulation. Introduction to the most current analysis and optimization tools for control device design and implementation. Three lecture hours and three hours of supervised work a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 391M. Advanced Geometric Design.

Geometric design of highways and guideways, including topics on levels of service, alignment, vehicle operations, intersection and interchange design, roadside design, lighting, and economics. Three lecture hours and one hour of supervised laboratory work a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 391N. Engineering System Evaluation and Decision Making.

Advanced methods for selection of transportation and other infrastructure systems in the presence of multiple criteria, multiple decision makers, and uncertainty. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 391P. Highway and Airport Pavement Systems.

Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 1: Theory and Behavior of Pavements. Theories of pavement behavior and concepts of pavement design.
Topic 2: Design and Performance of Pavements. Pavement performance evaluation and the application of theory to the design of pavements.
Topic 3: Pavement Management Systems. Defines the interrelationships among all aspects of pavement technology. Application of computer-based management methodology.

C E 391Q. Bituminous Materials.

Design and use of asphalt mixtures; chemical, physical, and rheological properties of asphalt; and practical applications in highways, airports, and other construction. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 391R. Airport Design and Operation.

Aircraft characteristics, site selection, airport configuration, capacity, terminal design, traffic control, and interfacing with other transportation modes. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 391T. Contemporary Transportation Issues.

Consideration, analysis, and evaluation of recent transportation-related innovations and developments. Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Offered on the credit/no credit basis only. Prerequisite: Graduate standing and consent of instructor.

C E 391W. Transportation Systems Operations and Control.

Concepts and advanced methods for the design of control strategies for transportation systems operations, including highway traffic systems (signalized street networks and freeways), transit systems, and private carrier operations, including airlines. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 392C. Transportation Network Analysis.

Transportation network analysis focusing on planning and optimization using static traffic assignment models. Subjects include deterministic and stochastic equilibrium, traditional and modern solution methods, shortest path algorithms, combined models, and basic nonlinear programming skills. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 392D. Dynamic Traffic Assignment.

Theory and practice of dynamic traffic assignment as an evolving field. Subjects include basic flow models (point queues, cell transmission model, and link transmission model), time-dependent shortest path algorithms, equilibrium algorithms (convex combinations, simplicial decomposition, and gradient methods), and case studies from practice. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 392E. Acquisition and Analysis of Transportation Data.

Methods and technologies for the acquisition and analysis of data on various aspects of transportation systems, including properties of different data sources and types; stated versus revealed preferences; traffic sensing; survey design; sampling strategies; probabilistic methods of data analysis; overview of statistical methods and various regression models, including random-utility, ordered-choice, simultaneous-equations, time-series, and spatial econometric models. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 392L. Experimental Measurements of Soil Properties.

Theoretical and practical knowledge of transducers, sensors, and data acquisition systems for soil and general laboratory testing. Experimental techniques used to characterize properties of geomaterials. Two lecture hours and three laboratory hours a week for one semester. Prerequisite: Graduate standing.

C E 392M. Public Transportation Engineering.

Introduction to public transportation systems, including demand forecasting, operations, and design. Includes statistical methods, driver and vehicle scheduling, algorithms, and survey sampling techniques. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 392N. Topics in Infrastructure Systems.

Management principles, modeling techniques, computer applications, and emerging technologies for the analysis, engineering, and management of infrastructure systems. Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 1: Infrastructure Systems Management. Concepts, principles, theories, and models for infrastructure management, with emphasis on civil infrastructure systems.
Topic 2: Reliability and Maintainability of Infrastructure Systems. Theory of reliability, maintainability, and availability and its application for the analysis of infrastructure systems. Civil Engineering 392N (Topic 2) and 397 (Topic: Reliability and Maintainability of Infrastructure Systems) may not both be counted.
Topic 3: Intelligent Infrastructure Systems. Concepts, frameworks, and models of intelligent infrastructure systems, with emphasis on the application of emerging technologies and advanced modeling techniques.

C E 392P. Sustainable Pavement Engineering.

Pavement design; back calculation; use of locally available materials for pavement construction; recycled asphalt pavements and shingles; warm mix and cold mix asphalt; industrial by-products and waste incorporated in pavement materials; emerging technologies for sustainable pavement design and pavement management. Three lecture hours a week for one semester. Civil Engineering 392P and 397 (Topic: Sustainable Pavement Engineering) may not both be counted. Prerequisite: Graduate standing, and Civil Engineering 366K, 367P, 391P (Topic 2: Design and Performance of Pavements), 391Q, or consent of instructor.

C E 392R. Discrete Choice Theory and Modeling.

Methods and statistics of model estimation, with emphasis on maximum-likelihood; individual choice theory; binary choice models; unordered multinomial and multidimensional choice models; sampling theory and sample design; ordered models and aggregate prediction with choice models; introduction to advanced concepts, such as unobserved population heterogeneity, joint slated preference and revealed preference modeling, and longitudinal choice analysis. Three lecture hours a week for one semester. Offered on the letter-grade basis only. Prerequisite: Graduate standing, and Civil Engineering 391J or consent of instructor.

C E 392S. Intermodal Transportation Systems.

Strategic planning of intermodal freight transportation systems (infrastructure and rolling stock). Freight logistics, intermodal technology, and intermodal terminal operations. Intermodal freight transportation policy, planning, and operational systems and programs. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 392T. Transport Economics.

Application of economic theory and principles to transportation systems analysis and evaluation. Subjects include individual demand decisions, optimal private and public transport supply (including pricing strategies and input demands), market imperfections and externalities, and welfare-based transport policy. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 392U. Transportation Systems Management.

Evolving concepts of transportation agency organization, management, and delivery of transportation programs, products, and services. Separation versus integration of transport policymaking and service delivery functions; emerging models for delivering programs and services, such as outsourcing, privatization, and state-owned enterprises; review of national and international experiences with innovative approaches and the benefits and costs associated with change. Three lecture hours a week for one semester. Prerequisite: Graduate standing.

C E 392V. Methods to Characterize Bituminous Materials.

Introduction to the design and performance prediction of asphalt mixtures. Experimental and computational methods used to characterize the chemical and mechanical properties and performance of bituminous materials at several different length scales. Includes computational models. Three lecture hours a week for one semester. Civil Engineering 392V and 397 (Topic: Characterization of Bituminous Materials) may not both be counted. Prerequisite: Graduate standing, and Civil Engineering 366K, 391Q, or consent of instructor.

C E 392W. Characterization of Viscoelastic Materials.

Test methods and physical models used to characterize the mechanical response of linear and nonlinear viscoelastic materials. Use of correspondence principles to solve simple boundary value problems for linear viscoelastic materials. Introductory topics on modeling damage and nonlinear response of viscoelastic materials. Three lecture hours a week for one semester. Civil Engineering 392W and 397 (Topic: Characterization of Viscoelastic Materials) may not both be counted. Prerequisite: Graduate standing.

C E 393. Advanced Concrete Materials.

Comprehensive coverage of Portland cement concrete materials. Topics include cement and aggregate properties, chemical and mineral admixtures, concrete microstructure and the effects of chemical and mechanical properties, durability issues, concrete construction, and special concretes. Three lecture hours a week for one semester. Offered on the letter-grade basis only. Prerequisite: Graduate standing, and Civil Engineering 314K or an equivalent materials course.

C E 393C. Experimental Methods in Cement Chemistry.

Cement chemistry, hydration, and microstructural formation; analytical techniques used in the investigation of cement and concrete. Three lecture hours a week for one semester. Civil Engineering 393C and 397 (Topic: Experimental Methods in Cement Chemistry) may not both be counted. Prerequisite: Graduate standing, Civil Engineering 351, 393, or the equivalent, and consent of instructor.

C E 393D. Concrete Durability.

Examine comprehensive coverage of durability issues affecting portland cement concrete. Includes transport properties (e.g., diffusion, osmosis, sorption, etc.), alkali-silica reaction, external sulfate attack, delayed ettringite formation, corrosion of reinforcing steel, freezing and thawing, and salt scaling. Explore, for each durability issue, the underlying mechanism are presented, along with methods for preventing such distress in new concrete construction. Three lecture hours a week for one semester. Civil Engineering 393D and 397 (Topic: Concrete Durability) may not both be counted. Prerequisite: Civil Engineering 393 or equivalent full-semester course in concrete materials, and consent of instructor.

C E 393M. Environmental Engineering Research Seminar.

Presentation and discussion of environmental topics in surface water, groundwater, air resources, and land resources. Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Offered on the credit/no credit basis only. Prerequisite: Graduate standing and consent of instructor.

C E 393N. Novel Structural Materials.

Material selection criteria, including mechanical and environmental factors; selected case studies of emerging materials, including derivation of properties and potential applications. Three lecture hours a week for one semester. Civil Engineering 393N and 397 (Topic: Novel Structural Materials) may not both be counted. Prerequisite: Graduate standing and consent of instructor.

C E 393S. Structural Engineering Research Seminar.

The equivalent of three lecture hours a week for one semester. Offered on the credit/no credit basis only. Prerequisite: Graduate standing.

C E 394. Interaction of Soils and Structures.

Beams on foundation, laterally loaded piles, applications of the finite-element method, beam-columns with nonlinear soil support, and behavior of pile groups. Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing, and a course in soil mechanics or consent of instructor.

Topic 1: Dynamic Soil-Structure Interaction. Fundamentals of wave propagation; determination of foundation stiffnesses; mat foundations on the surface of a layered soil; embedded foundations; pile foundations; effect of foundation conditions on dynamic response of structures to applied loads (machine foundations) and to seismic excitation. Additional prerequisite: Consent of instructor.

C E 394K. Engineering Hydrology.

Three lecture hours a week for one semester. With consent of instructor, any topic may be repeated for credit. May be repeated for credit when the topics vary. Prerequisite: Graduate standing; and a basic course in hydrology and in differential equations, or consent of instructor.

Topic 1: Groundwater Pollution and Transport. Groundwater flow and hydrogeologic modeling, sources of contamination, multiphase partitioning, advection-dispersion transport and modeling.
Topic 2: Surface Water. Rainfall runoff processes, hydrograph theory, linear and nonlinear hydrologic system models, hydrologic and hydraulic streamflow routing, rainfall and flood flow frequency analysis, watershed models.
Topic 3: Geographic Information Systems in Water Resources. Principles of geographic information systems, hydrology, and database management systems applied to water resources problems. Additional prerequisite: Consent of instructor.

C E 394M. Advanced Analyses in Geotechnical Engineering.

Development and application of linear and nonlinear finite element procedures for solution of geotechnical engineering problems related to embankments, excavations, static soil-structure interaction, and seepage. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 395P. Project Automation.

Three lecture hours a week for one semester. Some topics may require additional hours; these are identified in the Course Schedule. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 1: Advanced CAD Procedures. Same as Architectural Engineering 395P (Topic 1: Advanced CAD Procedures). Introduction to advanced CAD procedures and CAD systems, and their influence on building design and construction. Nine hours of lecture and laboratory a week for one semester. Additional prerequisite: An introductory CAD course.
Topic 2: Introduction to Construction Automation and Integration. Same as Architectural Engineering 395P (Topic 2: Introduction to Construction Automation and Integration). Construction automation and integration activities, methods for opportunity identification and financial analysis of systems, and tools from several disciplines that are used in construction automation and integration; students prepare a project that synthesizes this information.
Topic 3: Design of Automated Construction Systems. The elements of construction systems, including mechanisms, sensors, and control; systems design methods and concerns. Students develop an individual design project.
Topic 4: Sensing in Civil Engineering. Sensor types and properties, data acquisition, sensor data analysis, sensor fusion, and classes of civil engineering applications. Students are encouraged to work on projects related to their research areas.

C E 395Q. Project Controls.

Three lecture hours a week for one semester. Some topics require two lecture hours and three laboratory hours a week; these are identified in the Course Schedule. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 1: Project Controls. Fundamentals of planning, scheduling, and cost management on projects. Topics include network scheduling, activity and resource management, cost loading and cost control, and computer tools used for project controls, such as schedule simulation and three-dimensional and four-dimensional CAD.
Topic 2: Project Production Systems. Advanced topics in project controls, including supply chain management, procurement, interorganizational controls and incentives, process modeling, and simulation.
Topic 5: Financial Management for Engineering and Construction Firms. Introduction to financial, managerial, and tax accounting concepts, as well as corporate finance and strategy as they relate to engineering and construction firms. Emphasis is on content, interpretation, and uses of various accounting reports and financial statements in general, as well as those specific to engineering and construction industries. Topics include determination and reporting of net income methods and financial position unique to engineering and construction firms, and theories underlying business financial statements, as well as the consideration of managerial accounting and financial management topics that cover the planning and controlling of business operations and how financial management impacts a company's overall business success. Civil Engineering 395Q (Topic 5) and 397 (Topic: Financial Management for Engineering and Construction Firms) may not both be counted.

C E 395R. Project Information Systems.

Three lecture hours a week for one semester; some topics require additional hours. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 2: Project Information Management Systems. Information systems design and management concepts and their implementation in construction projects. Data acquisition, transmission, and storage; database management systems and information systems design.
Topic 3: Decision and Risk Analysis. Fundamentals of decision analysis and risk assessment; construction engineering/project management applications in decision analysis; methods of risk management; overview of project insurance.
Topic 4: Metrics. Measurement systems and benchmarking approaches for many aspects of construction projects. Included are measurement systems for design effectiveness, construction productivity, safety, cost and schedule controls, and overall industry statistics.
Topic 5: Data Mining. Same as Architectural Engineering 395R (Topic 5: Data Mining). Fundamentals of data mining. Techniques for data classification, prediction, clustering, and association rules mining. Data mining as an advanced data analysis method in engineering and construction. Implementation issues.
Topic 6: Quantitative Methods for Project Analysis. Practical methods of data analysis for evaluating project performance metrics. Includes quantitative methods for solving everyday problems such as bid selection, capital budgeting, assignment of resources, equipment replacement analysis, and the optimization of capital structure. Techniques for developing models under conditions of risk using Microsoft Excel and add-ins such as At Risk. Civil Engineering 395R (Topic 6) and 397 (Topic: Quantitative Methods for Project Analysis) may not both be counted.
Topic 7: Building Information Modeling for Capital Projects. Building information models in plan execution for a building construction project. Focus on implementation of building information modeling concepts throughout the lifecycle of a building, from planning and design to construction and operations. Civil Engineering 395R (Topic 7) and 397 (Topic: Building Information Modeling for Capital Projects) may not both be counted.

C E 395S. Project Organization.

Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 1: Human Resources Project Management. Evaluation of individual, group, and organizational behavior in construction work. In-depth study of communication, decision making, and the relationship between controls and behavior.
Topic 2: Construction Productivity. Construction productivity improvement by group field studies. In-depth study of the way overtime, changes, weather, and staffing levels influence productivity. Industrial engineering techniques are applied to the construction environment to improve the use of equipment and human and material resources.
Topic 4: Project Management. Same as Architectural Engineering 395S (Topic 4: Project Management). Overall aspects of project and portfolio management from inception to successful operation: project selection and feasibility, contracting methods, project scheduling, cost control systems, project communications, project scope and quality management, human resource management, partner selection and management, project leadership, project closeout, and global project management.

C E 395T. Project Technology.

Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 3: Heavy Civil Construction. Methods and materials in heavy civil construction; earthwork, concrete, structural steel, and deep foundations; equipment selection, configuration, productivity, and safety issues; site and craft planning, environmental issues, and optimization modeling; and field studies.
Topic 6: Value Management Processes I. Industry value management processes, including value engineering and life cycle costing, process simplification, function analysis concept development, design to capacity, constructability, modularization and preassembly, and design effectiveness.
Topic 7: Value Management Processes II. Industry value management processes, including mechanical reliability modeling, predictive maintenance, design for maintainability, waste minimization and pollution prevention, sustainable design and construction, planning for startup, lean construction, postoccupancy evaluation, and knowledge management and lessons learned systems.
Topic 8: Industrial Construction. Methods and materials in industrial construction; heavy lifts, mechanical equipment, process piping, electrical, and instrumentation work; equipment selection, configuration, productivity, and safety issues; preassembly, modularization, and work planning in the industrial environment; and field studies.

C E 395U. General Topics in Construction Engineering and Project Management.

Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 1: Front-End and Contractor Planning. Principles and applications of advanced project planning techniques for capital facility owners and contractors. Effective owner front-end planning of capital facilities, including team alignment, and preproject planning processes and tools. Contractor preconstruction planning, including team selection, scope and budget review, procurement, strategic sequencing, and planning assessment tools.
Topic 3: Advanced Legal Concepts. Same as Architectural Engineering 395U (Topic 3: Advanced Legal Concepts). Contracts, documentation requirements, claims avoidance, and settlement of claims by alternative dispute resolution. Students conduct and present in-depth studies of the most frequent causes of claims (delay, disruption, acceleration, soil conditions, and changes) and consider the way the court establishes causation and determines damages.
Topic 4: Construction Safety. Causes and effects of construction safety incidents, proactive preventative strategies, and tactics. Civil Engineering 395U (Topic 4) and 397 (Topic: Construction Safety Management) may not both be counted.

C E 395V. Seminar/Conference Course in Construction Engineering and Project Management.

Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 1: Doctoral Research Methods Seminar. Construction research methods seminar, including concepts and practice of research in construction engineering and management. Research methodologies and steps in the research process, including review and framing research questions. Students develop and critique a research proposal.
Topic 2: Conference Course.
Topic 3: Construction Industry Seminar. Construction industry issues and best practices, such as front-end planning and zero accident techniques, developed by the Construction Industry Institute (CII). Guest lecturers include CII management staff and visiting industry leaders. Emphasis on implementation of proven practices on projects.

C E 396L. Air Resources Engineering.

Sources, transport, fate, impacts, characteristics, and control of air contaminants; source control and prevention; urban air quality; occupational and residential indoor air quality. Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing and consent of instructor.

Topic 1: Air Pollution Chemistry. Classification, transport, transformation, deposition, sampling, and analysis of particulate and gaseous air pollutants in urban, regional, and global-scale systems. Emphasis on sustainable engineering.
Topic 3: Air Pollution Control. Design of air pollution control systems for stationary sources. Technical, regulatory, and economic fundamentals related to the control of gaseous and particulate emissions.
Topic 4: Indoor Air Quality: Physics and Chemistry. Sources, transport, and fate of indoor air pollutants. Interactions between indoor pollutants and indoor materials. Indoor air chemistry. Human exposure to pollutants in indoor environments.
Topic 5: Atmospheric Transport and Dispersion Modeling. Mathematical models of contaminant transport in the atmosphere; atmospheric turbulence and air pollution meteorology; Gaussian plume, gradient transport, and higher-order closure models; theoretical development and practical applications to engineering problems.
Topic 6: Human Exposure to Indoor Air Pollution. Human exposure to air pollution in the built environment, including the effects of sustainable building design on human exposure to toxic air pollutants. Subjects may include inhalation intake fractions for risk calculations and comparisons of sources of air pollution, transmission of airborne infectious disease, pharmacokinetic modeling, and case studies involving several important air pollutants. Civil Engineering 396L (Topic 6) and 397 (Topic: Human Exposure to Toxins) may not both be counted.

C E 396M. Advanced Topics in Atmospheric Science.

Three lecture hours a week for one semester. May be repeated for credit when the topics vary. Prerequisite: Graduate standing in a natural science or engineering.

Topic 1: General Topics.
Topic 2: Air Pollution Meteorology. Basic meteorology applied to air pollution; diffusion of conservative and nonconservative pollutants; plume rise; air pollution models.

C E 197, 297, 397. Special Studies in Civil Engineering.

For each semester hour of credit earned, the equivalent of one lecture hour a week for one semester; some topics require additional hours. May be repeated for credit when the topics vary. Prerequisite: Graduate standing; consent of instructor; additional prerequisites vary with the topic.

Topic 4: Freight Transportation. Topics include review of transport systems analysis; shipper objectives; demand and supply modeling; freight flow data; network analysis; truck size and weight policies; finance.
Topic 6: Traffic Science Seminar. Topics range from fundamentals of vehicular traffic science to relevant methodologies in physics, applied mathematics, and operational science.
Topic 14: Design of Wood Members and Systems. Design and behavior of solid wood and glued-laminated wood structural members; light-frame and heavy timber systems, including trusses and arches. Additional prerequisite: Consent of instructor.
Topic 16: Evaluation, Materials, and Techniques for Concrete Repair. Causes of distress, evaluation methods, repair materials, repair techniques, and quality control methods for repair of concrete. For each semester hour of credit earned, the equivalent of one lecture hour a week for one semester, with one and one-half additional hours a week for guest speakers. Architectural Engineering 383 (Topic 7) and Civil Engineering 197, 297, 397 (Topic 16) may not both be counted.
Topic 17: Air Sampling and Analysis. Collection and analysis of air samples for gaseous and particulate contaminants. Gas flow rate and calibration techniques, stationary source sampling and analysis, indoor air sampling, ozone and NOx ambient air monitoring.
Topic 20: Computer Methods for Civil Engineers. Essential methods for computer-aided problem solving in transportation and other civil engineering areas. Topics may include computer operating systems concepts; the Internet and World Wide Web site design; advanced programming with C programming language; data structures; file manipulation and management; Monte Carlo simulation techniques; interfacing with spreadsheets, SQL databases, and computer-aided design packages; introduction to Geographic Information Systems. Team programming is emphasized.
Topic 22: Intelligent Transportation Systems Seminar. Introduction to Intelligent Transportation Systems (ITS) concepts, evolution, and current initiatives. Program evolution from Mobility 2000, through IVHS and strategic planning activities by the Department of Transportation and ITS America, to current operational tests and deployment projects.
Topic 32: Hydrodynamics of Propulsors and Dynamic Positioning Systems. Hydrofoil and lifting surface theory, actuator disk and lifting line theory, vortex-lattice and panel methods, blade design techniques, propulsor-inflow and propulsor-hull interaction, unsteady blade and shaft forces, and modeling of sheet cavitation.
Topic 35: Introduction to Structural Mechanics. Discussion of force and stress, vectors and tensors; equilibrium; displacement and deformation; compatibility; constitutive equations, with examples from linear elasticity, linear viscoelasticity, and plasticity; principle of virtual work; elastic structures, principle of minimum potential energy, reciprocity theorem; critical equilibrium, stability; linear theories of beams, plates, and shells.
Topic 50: Water Resources Development and Policies. Analysis of water resources projects, particularly international water projects, with emphasis on engineering and planning considerations and their relation to governmental policies.
Topic 54: Water Pollution Control. The application and evaluation of new concepts in water pollution abatement and advanced water and wastewater treatment.
Topic 56: Air Pollution Control. Evaluation of new theoretical approaches to air pollution control.
Topic 78: Design of Offshore Structures. Selection of design storm; wave forces on structures; preliminary analysis of steel jacket platforms; joint design; fatigue considerations; foundation design; dynamic effects and responses.

C E 197C, 297C, 397C, 697C. Master's Research.

Independent research. May be repeated for credit. Offered on the credit/no credit basis only. Prerequisite: Graduate standing and consent of adviser.

C E 197D, 297D, 397D, 697D. Dissertation Research.

Independent research. May be repeated for credit. Offered on the credit/no credit basis only. Prerequisite: Graduate standing and consent of adviser.

C E 397F. Forensic Engineering: Materials and Structures.

Same as Architectural Engineering 383 (Topic 4: Forensic Engineering: Materials and Structures). Methods of forensic analysis; role of the expert witness; methods of dispute resolution; case studies; term project. Two lecture hours a week for one semester, with three laboratory hours a week for presentation of case studies. Prerequisite: Graduate standing and consent of instructor.

C E 397K. Stability of Structures.

Stability as it relates to actual behavior and design; elastic and inelastic theories; evaluation of specifications; columns, beams, and frames. Three lecture hours a week for one semester. Prerequisite: Graduate standing and consent of instructor.

C E 397L. Advanced Structural Metals.

Elastic and inelastic design methods for steel members, connections, and structures; torsion of open and closed sections, welding, plate buckling, and column stability; bracing design. Three lecture hours a week for one semester. Prerequisite: Graduate standing, Civil Engineering 335, and consent of instructor.

C E 397N. Nondestructive Testing Techniques.

Basic signal processing knowledge; introduction to wave propagation theory; nondestructive testing (NDT) principles and applications to steel structures; evaluation of concrete structures and foundations; NDT methods selection; emerging technologies. Three lecture hours a week for one semester. Civil Engineering 397N and 397 (Topic: Nondestructive Testing Techniques in Civil Engineering) may not both be counted. Prerequisite: Graduate standing.

C E 197Q, 297Q, 397Q, 697Q. Special Independent Studies in Civil Engineering.

Independent study. May be repeated for credit. Offered on the credit/no credit basis only. Prerequisite: Graduate standing and consent of adviser.

C E 698. Thesis.

The equivalent of three lecture hours a week for two semesters. Offered on the credit/no credit basis only. Prerequisite: For 698A, graduate standing in civil engineering and consent of the graduate adviser; for 698B, Civil Engineering 698A.

C E 398D. Departmental Report.

Preparation of a report to fulfill the requirement for the master's degree under the departmental report option. Individual instruction. Offered on the credit/no credit basis only. Prerequisite: Graduate standing in civil engineering and consent of the supervising professor and the graduate adviser.

C E 398R. Master's Report.

Preparation of a report to fulfill the requirement for the Master of Science in Engineering degree under the Graduate School report option. The equivalent of three lecture hours a week for one semester. Offered on the credit/no credit basis only. Prerequisite: Graduate standing in civil engineering and consent of the supervising professor and the graduate adviser.

C E 398T. Supervised Teaching in Civil Engineering.

Special training in teaching methods and procedures for civil engineering courses, including laboratory courses; the development of new material and methods to update present courses. Three lecture hours a week for one semester. Prerequisite: Graduate standing in civil engineering and appointment as a teaching assistant.

C E 399W, 699W, 999W. Dissertation.

May be repeated for credit. Offered on the credit/no credit basis only. Prerequisite: Admission to candidacy for the doctoral degree.